Tyre Care, Tyre Positioning and Handling

When replacing car tyres the ideal situation would be to replace all four tyres together. However as vehicles wear their front and rear tyres at different rates, this cannot always be done. In this case, new tyres should be fitted to the rear and move the part worn rear tyres to the front.

Why Fit New Tyres to the Rear?

Primarily to ensure that vehicle stability is maintained in extreme working conditions of hard or emergency breaking and cornering. This is especially critical on wet or slippery roads. This also provides additional protection against sudden deflation in the rear tyres, which is most likely to cause loss of vehicle control.

Most modern vehicles, being front wheel drive, the front tyres wear faster than the rear ones.

The driver is therefore used to having less grip at the front as the tyres wear towards replacement. By fitting new tyres to the rear and repositioning the more worn tyres on the front axle, the condition the driver has become used to is retained after the tyre change.


Four Wheel Drive Vehicles

It is strongly recommended that on 4x4  vehicles identical sets of four (same make, pattern load index/speed symbol) are used. The vehicle manufacturer’s recommendations should also be followed.



Protyre offer a wide range of Car, Van, & 4x4 Tyres from leading manufacturers!

Use our quick and easy tyre finder to select the best tyres for your vehicle today! Simply enter you reg or a specific tyre size below to get started.

About the author

Dean Richardson

Dean is a Regional Director for Protyre who is also responsible for the running of our Protech Academy. The ...

View author